Engine wiring diagrams - and all wiring diagrams?

Hello, I'm Danny.

I've attached below the wiring diagram for the remote keyless entry door locks for your car. I've cut the picture into 2 pieces so you can view larger. Hope this helps and thanks for using 2CarPros.

I've ordered the Docooler Car Remote Central Lock Locking Keyless Entry System with Remote Controllers and I'll try to use the wiring diagrams to wire it up and see if I can get it to work. I'll let you know the results . Thank you

Hello again.

Sounds good. Keep us updated and we'll go from there. If when you receive you want to upload their wiring diagram I'll help match things up for you. Hope this helps and thanks again for using 2CarPros..

Danny-

I'll let you know, have a good safe night.

Thanks!

Have a good night and thanks again for using 2CarPros.

Danny-

I received the Docooler Car Remote Central Lock Locking Keyless Entry System from UPS today.
The only way that I can give you the wiring diagram for it is to take a picture of the paper that the wiring diagram is on that came with the product I ordered.
I will take 2 pictures of the Keyless Entry Instruction and it will be the front and back of the paper .Can I send these photos from an SD card to you ? Thanks

Danny, if you remember this will be connected to a 2002 Saturn L200 car, you sent me the wiring diagram to it the other day.

Hello again.

Yes, if can only to a picture of a piece of paper that will be okay as long as you can upload it here for us to view. We can only view the uploads here so emails and whatnot aren't allowed between people per the site rules. Let me know if you can upload the pictures here and we'll go from there. Hope this helps and thanks again for using 2CarPros.

Danny-

here is the wiring for this:

I might have to get you a better picture tomorrow if you want me to. Thanks

Hello again.

Yes, that is too small for me to view. If you can blow it up I could view better. We'll be looking for your response and we'll go from there. Thanks again for using 2CarPros.

Danny-

I might need to take 2 different pictures, the top half of the paper then the 2nd picture being the bottom half so you can see it better.

Hello again.

That's fine. We'll be looking for it and get back to you. Thanks again for using 2CarPros.

Danny-

here is the 1st half of the wiring:

here is the 2nd half of the wiring:

another picture.

picture.

last picture ,hopefully you can see the wiring.

Hello again.

Is that all the directions there are? No wording? Figure A,B,C,D, and E all are using the same color wires. Kind of weird. I'll look on their site to see if there is anything more. Thanks again for using 2CarPros.

Danny-

1st pic of the text.

2nd pic of text.

3rd picture of text.

4th and final text.

Hi,

I noticed that you have been waiting for a reply. By chance, has the issue been resolved? I read through what you have been working with. It's a bit difficult to read the directions you have, so let me know what is happening. Hopefully, I'll be able to help.

Joe

It hasn't been answered fully yet. but the instructions seems like a foreigner is doing the talking that isn't our way of explaining things. If you can help me I would appreciate it.

I will be happy to at least try. Can you tell me what has been done so far and what the objective we are trying to reach is? Is this an aftermarket fob you are trying to install?

Joe

It has the receiver and 2 key fobs that came with it, I need to be able to wire it to my 2002 Saturn L200.

Hello again.

I haven't forgotten about you. I have an incoming phone call from the technical support department to speak to them tomorrow Monday 11/9/2020 regarding this. I will contact you shortly after I hear from them. Thanks again for using 2CarPros.

Danny-

No problem , I'm not in a hurry anyways, take your time. that's the best policy when attempting to fix anything to get it right the 1st time, thanks.

Hi,

I looked through this and jumping back and forth through your pics and the car's schematics. this should make the lock and unlock work. To get the lights to flash will require you to connect the brown wires to the lighting circuit. I attached a pic below of the wiring where I feel you need to splice into the locking system.

Please keep in mind, this is a theory, but since the controller you purchased supplies a 12v signal, it should work.

Controller To Vehicle Main door switch

White To Red / Black

White / Black To Orange / Black

Black To Ground on the vehicle

Red To 12v constant power supply,

Danny, please let me know your thoughts on this. This should be a basic set up to lock and unlock the doors. What do you think?

Joe

It might be a few days before I get back to you, but there is a lot of wires on the controller I have and I'll let you know something about it sometime. Thanks for your help.

Hi,

I noticed that. However, (and I could be wrong) the schematics provided show NC. I'm wondering if that means they are not connected. Regardless, hopefully, Danny can explain this to both of us. LOL

It might mean normally closed in a relay, that's how they abbreviate it in electronics.

Hello again.

Yes, I will get back to you when I'm fully sure how to wire this. I'll be having another call with tech support tomorrow. Sorry to keep you waiting so long but I like to be 100% sure and not give any bad advice. Thanks again for using 2CarPros.

Danny-

Okay, thanks.

This door control box has 9 wires plus the red (hot) and black (ground) wires coming out of it if this will help you anyway.

There's 11 wires total coming out of this control box, I forgot to say that in the last message.

Do you want me to take a picture of the wires on this door lock device ?

Hello again.

Yes, that would be helpful.

Danny-

here one picture is: