i would start with having a wet & dry compression test done as i feel that your problem will be ring related, if this is so, you should consider re building the engine.
Mark (mhpautos)
Oct 9, 2020 at 4:52 PM
(Merged)
WEAVERCOREY
MEMBER
2 POSTS
My truck when started spits out a little white smoke, and also when accelerating after 3500 rpm in 1st through 3rd gear i think it may be the valve seals but im not sure, and how would i go about fixing this
Oct 9, 2020 at 4:52 PM
(Merged)
Advertisement
RASMATAZ
CERTIFIED EXPERT
75,992 POSTS
White smoke indicates coolant is burning within the combustion chambers and Blue smoke is oil.
If its actually white could be the headgasket, cracked head or block and intake leak-is the engine temperature rising to an abnormal level?
Oct 9, 2020 at 4:52 PM
(Merged)
WEAVERCOREY
MEMBER
2 POSTS
No the temperature stays constant even with extended driving, and the coolant level doesn't change either
Oct 9, 2020 at 4:52 PM
(Merged)
RASMATAZ
CERTIFIED EXPERT
75,992 POSTS
Are you sure its white?
My truck when started spits out a little white smoke,If not could be just condensation if not get it block and pressure tested
White smoke is definitely burning coolant. If that is the case, a leak-down test needs to be done to determine the failure. In most cases, it is a head gasket.
If it is blue, it is the valve seals. They can be replaced without major work being required.
Roy
Aug 11, 2021 at 3:39 AM
ASEMASTER6371
CERTIFIED EXPERT
52,796 POSTS
Did you respond? I got an email but nothing came through.