Aug 9, 2020 at 11:30 AM
(Merged)
Turn signal troubles?
2006 SATURN ION
Advertisement
Discount code is 5749533551276203 put it in the order screen where it says how did you hear about us box.
I got the multimeter from my buddy but he didn't give that thorough instructions on how to use it. Where do I check in the headlight? And it has a manual knob on the multimeter? Where do I set it at for testing?
Aug 9, 2020 at 11:30 AM
(Merged)
Advertisement
https://www.2carpros.com/articles/how-to-use-a-voltmeter
I posted how to use a multi meter you need to unplug the headlight assembly and measure the resistance from one end of the headlight harness to where the bulb plugs in.You can match up the colors of the wires.You should see two ohms or less on each of the two wires.
I posted how to use a multi meter you need to unplug the headlight assembly and measure the resistance from one end of the headlight harness to where the bulb plugs in.You can match up the colors of the wires.You should see two ohms or less on each of the two wires.
Aug 9, 2020 at 11:30 AM
(Merged)
Thanks dude! I didn't even need to use the multimeter. A wired wasn't connecting to The clip in the middle so I spliced it to the the connecting wire and capped it. Works like it never had a problem. Now once I order the wipers and install them I'll have a driveable car
Aug 9, 2020 at 11:30 AM
(Merged)
Good to hear you will like the dorman wiper transmission my niece has had hers in her car for a few years now probably longer then I even realize.Time flies by so quickly these days.
Aug 9, 2020 at 11:30 AM
(Merged)
Also tell all your friends about our website
Aug 9, 2020 at 11:30 AM
(Merged)
I have checked all the fuses. Checked all the bulbs and relays. It doesn’t show on the inside of the fuse box a fuse for blinkers. I have checked to see if there is power going into the multi-function switch. And 3 of the leads have power. But there is no blinking or noise. My fan for heat/ac didn’t have power either. Not does my trunk button. Not sure what else doesn’t work. I was told the cooling fan doesn’t want to work sometimes. Someone suggested the BCM is bad. I don’t want to waste money if it’s something else. I just don’t know what to do can anyone help?
Aug 9, 2020 at 11:30 AM
(Merged)
Hi,
Based on your description, it does sound as though the body control module is the cause. If you look at pic 1, I highlighted output for the blinkers. What I suggest is to simply check if there is power out from the BCM. Also, check to make sure the ground (pic 2) is in good condition and not damaged or corroded.
Let me know what you find.
Joe
Based on your description, it does sound as though the body control module is the cause. If you look at pic 1, I highlighted output for the blinkers. What I suggest is to simply check if there is power out from the BCM. Also, check to make sure the ground (pic 2) is in good condition and not damaged or corroded.
Let me know what you find.
Joe
Aug 9, 2020 at 11:30 AM
(Merged)
Thank you I will check that out tomorrow. I just seen it now. I will let you know what I can find out.
Aug 9, 2020 at 11:30 AM
(Merged)
Hi,
That sounds like a plan. Let me know the results.
Take care,
Joe
That sounds like a plan. Let me know the results.
Take care,
Joe
Aug 9, 2020 at 11:30 AM
(Merged)

