Serpentine Belt Replacement?

2006 KIA SPECTRA
97,000 MILES • 2.0L • 4 CYL • FWD • AUTOMATIC
Avatar
SREEVES88
  • MEMBER
  • 1 POST
My vehicle doesn't seem to have a belt routing diagram and they need to be replaced. what is the best way to do this? i believe i have located the tensioner pully but am not completely sure.
Sep 2, 2014 at 3:26 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
Let me know if this helps.

https://www.2carpros.com/diagrams/kia/spectra/2006

and

https://www.2carpros.com/articles/replace-serpentine-belt

Please let us know if you need anything else to get the problem fixed.
Sep 2, 2014 at 7:19 PM
Avatar
NATGONZ09
  • MEMBER
  • 1 POST
Air Conditioning problem
2006 Kia Spectra Front Wheel Drive Automatic

Yes, my question is that I am in the process of changing the belts on my car and I am stuck on how to finish. I already took out the ac belt but I am having difficulty putting the new one back on. So my question is what is the process of placing the new belt back on? Thanks and any answer would be helpful.
Jul 21, 2020 at 2:04 PM (Merged)
Advertisement
Avatar
DOCFIXIT
  • CERTIFIED EXPERT
  • 18,828 POSTS
Loosen bolt in center of tensioner pully back off adjusting bolt position belt tighten adj. bolt till belt deflecys 1/2 " tighten pully bolt
Jul 21, 2020 at 2:04 PM (Merged)
Avatar
N CHRISTIAN SMITH
  • MEMBER
  • 1 POST
I replaced the timing belt and had to take off the air conditioner power steering and alternator belts and now do not know which way those three belts go back on. do you have a routing diagram or something I can see to put the belts back on?
Jul 21, 2020 at 2:05 PM (Merged)
Avatar
WRENCHTECH
  • CERTIFIED EXPERT
  • 20,761 POSTS
If it has three separate belts, then there are no diagrams available. The alignment will be very obvious.You have three separate pulley track and a simple visual will tell you which pulleys align with each other.the belts are layered.
Jul 21, 2020 at 2:05 PM (Merged)
Avatar
SHEFFIELD734
  • MEMBER
  • 1 POST
How do you change the air conditioner belt on a 2005 Kia Spectra?
Jul 21, 2020 at 2:05 PM (Merged)
Avatar
STRAILER
  • CERTIFIED EXPERT
  • 53,854 POSTS
Yes there is a tensioner that will need to be released. Here is a guide that will let you know what you are in for when changing the belt.

https://www.2carpros.com/articles/replace-serpentine-belt

Let me know how to goes, we are here to help.





Jul 21, 2020 at 2:05 PM (Merged)
Avatar
AIRFORCEFREAK10
  • MEMBER
  • 4 POSTS
I live in Washington State so it's very cold outside right now. I park my car outside so this may be a factor. When I start up my car, everything is fine. I can let my car warm up or I can just drive it away. When I start driving it though, I hear this loud screeching noise coming under my hood. I went to my mechanic and he said that they are my belts. So he tighten power steering, water pump and alternator belt. Also he changed my power steering fluid too. My car doesn't make this sound all the time, but it has done it three times when I was driving to work in the past ten minutes. It's very bad because I can hear the screeching noise and so can other people. Are my belts going bad, power steering going out, my pulleys or belt tensioner that need to be changed or is my problem all the above? I also had this problem during the summer time, so this is just not happening; but I'm finding out that the problem is more common when it's cold outside.

Any help would be appreciated and thanks for the help!

Jul 21, 2020 at 2:06 PM (Merged)
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
i would have the belts replaced with good quality belts. they are worn out. once they squeel, they are stretched and will break if they are tightened.

Roy
Jul 21, 2020 at 2:06 PM (Merged)
Avatar
AIRFORCEFREAK10
  • MEMBER
  • 4 POSTS
Thank you for the advice, I'll tell my mechanic that I want the repair done. I'll keep you updated if I hear improvements when the belt gets changed. Thank you again for your help!
Jul 21, 2020 at 2:06 PM (Merged)
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
good luck

roy
Jul 21, 2020 at 2:06 PM (Merged)
Avatar
WYONATW
  • MEMBER
  • 1 POST
Other Category problem
2003 Kia Spectra 6 cyl Wheel Drive Type unknown Automatic 100000 miles
----------------------------------------------------------------
Trying to change alternator and a belt. Unable to
shift gear to neutral to take off belt.
Jul 21, 2020 at 2:06 PM (Merged)
Avatar
DAVE H
  • CERTIFIED EXPERT
  • 13,384 POSTS
REMOVAL
Remove negative battery cable.
Open B terminal cover cap.
Remove B terminal nut.
Remove B terminal lead.
Disconnect generator L and S terminal connectors.
Loosen pivot bolt and tensioner mounting bolt. Do not remove.
Relieve tension on drive belt by rotating adjustment bolt.
Remove drive belt from generator pulley.
Remove tensioner mounting bolt and belt tensioner.
Remove generator pivot bolt.
Loosen bolt at base of adjusting bracket and rotate the bracket up.
Lift generator from engine compartment.
Jul 21, 2020 at 2:06 PM (Merged)
Avatar
JEREMIAH_P
  • MEMBER
  • 1 POST
2003 Kia Spectra

How do I change it?
Jul 21, 2020 at 2:06 PM (Merged)
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
take a look at this page. It shows the alt and adjuster. NOTE: You must first loosten the bolts on the bracket so it can move.

https://www.2carpros.com/car_repair_information/year/2003/make/kia/model/spectra/2003_kia_spectra_drive_belt_routing_diagram.htm

Let me know if this helps or if you have other questions.

Joe
Jul 21, 2020 at 2:06 PM (Merged)
Avatar
JOSEPH GEE SR.
  • MEMBER
  • 6 POSTS
Having problems getting the front belt off so I can change the Alternator belt need to know how to get it off.
Jul 21, 2020 at 2:06 PM (Merged)
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
Loosen the alternator mounting bolts and then loosen the belt adjusting bolt.
Jul 21, 2020 at 2:06 PM (Merged)
Avatar
JOSEPH GEE SR.
  • MEMBER
  • 6 POSTS
But I have already loosened all of that and I still cannot get the front belt to come off. so want do I do with it now?
Jul 21, 2020 at 2:06 PM (Merged)
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
Take some pictures of the belt area and post them so I can see what is going on.
Jul 21, 2020 at 2:06 PM (Merged)
Avatar
JOSEPH GEE SR.
  • MEMBER
  • 6 POSTS
Okay, when I get back to the car in the morning I will take some pictures off it and send them to you.
Jul 21, 2020 at 2:06 PM (Merged)
Avatar
JIM4DEFENSE
  • MEMBER
  • 1 POST
replace 2003 kia spectra ac and alternator belts (2 different belts)
Jul 21, 2020 at 2:06 PM (Merged)
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
Hi:

It's not that bad of a job other than tight spaces. Refer to our homepage under the DIY section and look up belt routing. There will be schematics for your vehicle that will indicate where the tensioners are located and how the belts are to be routed.
Jul 21, 2020 at 2:06 PM (Merged)
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
Okay sounds good. take some good pictures.
Jul 21, 2020 at 2:06 PM (Merged)
Avatar
JOSEPH GEE SR.
  • MEMBER
  • 6 POSTS
I will.
Jul 21, 2020 at 2:06 PM (Merged)
Avatar
JOSEPH GEE SR.
  • MEMBER
  • 6 POSTS
Hopefully you got the pictures I sent to you if not you can call me at 7656397376.
Jul 21, 2020 at 2:06 PM (Merged)
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
Where did you send the pictures too? you can post them to the question just click the add image tab.
Jul 21, 2020 at 2:06 PM (Merged)
Avatar
DONALD PEARCE
  • MEMBER
  • 2 POSTS
Where are the tensioners to loosen the bolts?
Jul 21, 2020 at 2:06 PM (Merged)
Avatar
JOSEPH GEE SR.
  • MEMBER
  • 6 POSTS
Hey I got it figured out but thanks for trying to help me figure it out k.
Jul 21, 2020 at 2:06 PM (Merged)
Avatar
KASEKENNY
  • CERTIFIED EXPERT
  • 18,907 POSTS
Hi Donald,

Here is the procedure for this which shows where the bolts are on the generator.

Let me know if you need more information or have questions. Thanks
Jul 21, 2020 at 2:06 PM (Merged)
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
Your welcome
Jul 21, 2020 at 2:06 PM (Merged)
Avatar
DONALD PEARCE
  • MEMBER
  • 2 POSTS
So I have to remove the power steering belt to get to the alternator belt? How and what boots do I remove?
Jul 21, 2020 at 2:06 PM (Merged)
Avatar
KASEKENNY
  • CERTIFIED EXPERT
  • 18,907 POSTS
Yes. Looks like that one comes off first. Here are the adjustment bolts on the power steering pump. Once that is off, you loosen the generator bolts that I circled. You don't remove the bolts. Just loosen them so you can move the generator to take the tension off the belt.
Jul 21, 2020 at 2:06 PM (Merged)
Avatar
ADSIUM
  • MEMBER
  • 2 POSTS
car has a screeching high pitch noise when starting. The previous owner changed belts and tightening, noise increases when AC/heat on.
Jul 21, 2020 at 2:06 PM (Merged)
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
have all pulleys and tensioners checked, but remove belts first then start car see if it still does it, if not it is in accessory drive.
Jul 21, 2020 at 2:06 PM (Merged)
Avatar
ADSIUM
  • MEMBER
  • 2 POSTS
Thank you HMAC300. Is that a shovel-head? Bear with me here since not a mechanic. So, I will take belts out and when check tensioners and pulleys. what am I looking for? is this an accessible job for beginners? if it does not make noise when i start car without the belts means that is an accessory drive. Where is that drive? Do i need to replace anything?
Jul 21, 2020 at 2:06 PM (Merged)
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
the accessory drive is alternator/ac pump and power steering pump. check pulleys for noise and wobble if they wobble they will make noise. also if you put a new belt on replace the tensioner as well. a lot of times it's a alternator bearing making noise or clutch on a/c pump.
Jul 21, 2020 at 2:06 PM (Merged)
Avatar
L DOG
  • MEMBER
  • 1 POST
DO YOU KNOW THE DIAGRAM TO CHANGING THE ALTINATOR BELT
Jul 21, 2020 at 2:06 PM (Merged)
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
If you go to the Belt Routing Diagram site on this page, you will be able to get that info.

Let me know if it helps.
Jul 21, 2020 at 2:06 PM (Merged)
Avatar
JOHNATHONH811
  • MEMBER
  • 2 POSTS
I need to know how to change an alternator belt on a 2002 Kia Spectra. Any advice would be great. Thank you.
Jul 21, 2020 at 2:06 PM (Merged)
Avatar
BLUELIGHTNIN6
  • CERTIFIED EXPERT
  • 16,542 POSTS
REMOVAL: Remove the A/C and power steering pump belt, if equipped. Loosen the alternator mounting bolt and adjusting bolt. Remove the alternator belt.


https://www.2carpros.com/forum/automotive_pictures/261618_0900c15280028466_2.jpg

INSTALLATION: Install the alternator belt and adjust, as outlined earlier. Tighten the bolts, as follows: Mounting bolt: 27-38 ft. lbs. (37-52 Nm) Adjusting bolt: 14-18 ft. lbs. (19-26 Nm) Install the A/C and power steering pump belt, if equipped. Check the belt tension and adjust as necessary. Thanks for using 2CarPros.com!
Jul 21, 2020 at 2:06 PM (Merged)