Turn signal problem

2013 FORD F-150
141,000 MILES • 5.0L • V8 • 4WD • AUTOMATIC
Avatar
DMHENT
  • MEMBER
  • 1 POST
I put a new multi-function switch in because my wipers quit working properly. Now everything works properly except the turn signal. It works in lane change mode, flashes three times, but then stops. If I hold the handle it works, just not on its own. I thought it might be a bad switch so I got another one and same thing happens. Any suggestions?
Jun 6, 2019 at 2:11 PM
Advertisement
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
Good afternoon,

The signals are controlled by the Body Control Module.

The serial data line is what controls it. You command the lights to come on and a signal is sent to the module which activates the lights according to your command.

I attached a diagram for you to view.

You will need an advanced scan tool to monitor the BCM outputs.

Roy

Images (Click to enlarge)
Attached Media
Attached Media
Jun 6, 2019 at 2:43 PM
Avatar
BMDOUBLE
  • CERTIFIED EXPERT
  • 1,139 POSTS
Have the part number verified with your VIN number at a Ford dealership. There are more than one type and aftermarket manufacturers sometimes get it wrong or make a “one fits all” part.
Jun 24, 2019 at 7:23 PM
Advertisement