Transmission E-module broken

2012 HYUNDAI GENESIS
186,000 MILES • 3.8L • 6 CYL • 2WD • AUTOMATIC
Avatar
BHAMDOC1973
  • MEMBER
  • 2,008 POSTS
while removing the valve body to change 2 solenoids, the e-module broke as the harness connector was stuck to the case. I need to get another. What do I need to do? program it? I know if I get a TCM I have to program it but is there an option to program this part only if that is all I buy? the piece is what is in the picture
Images (Click to enlarge)
Attached Media
Attached Media
Sep 23, 2025 at 12:20 PM
Advertisement
Avatar
STEVE W.
  • CERTIFIED EXPERT
  • 15,113 POSTS
Service info says you replace the module and the control module does the rest. No programming needed.
Sep 23, 2025 at 6:48 PM
Avatar
BHAMDOC1973
  • MEMBER
  • 2,008 POSTS
thanks
Sep 23, 2025 at 7:13 PM
Advertisement
Avatar
STRAILER
  • CERTIFIED EXPERT
  • 53,854 POSTS
STEVE W. is one of our best! please use 2CarPros anytime.
Sep 25, 2025 at 10:08 AM
Avatar
BHAMDOC1973
  • MEMBER
  • 2,008 POSTS
https://static.nhtsa.gov/odi/tsbs/2021/MC-10204249-0001.pdf
Oct 8, 2025 at 2:21 PM
Avatar
BHAMDOC1973
  • MEMBER
  • 2,008 POSTS
can u check the tsb below and go to step 10 and tell me if you see a circle like they say? it says to insert the short bolt there
Oct 8, 2025 at 2:22 PM
Avatar
STEVE W.
  • CERTIFIED EXPERT
  • 15,113 POSTS
Sorry for the late response, site has been having issues. Looked at the TSB from a few sources, the only thing that looks like a circle is the recessed bolt in the original. The one I circled in this image. What you could do is take a piece of wire, run it into each hole where it bottoms, then use it to find the shallower hole.
Image (Click to enlarge)
Attached Media
Oct 8, 2025 at 9:16 PM