Can I get the TIPM wire pin out diagram?

2011 JEEP WRANGLER
187,732 MILES • 3.8L • 6 CYL • 4WD • AUTOMATIC
Avatar
VOLCER10
  • MEMBER
  • 2 POSTS
Thank you for taking the time to read this. Looking for a diagram of the pin out locations for the c4 connector and wire color's locations for pin 1 through 16for 2011 Jeep jku.

Thank you for your time.
Jan 24, 2024 at 7:00 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
Hi,

Happy to help. If you look below, the first pic is the connector view. The second picture is what each pin is used for. Note: From experience, inspect the pins closely in both ends of the connector. They can show power and then fail when under a load.

Let me know if this helps or if you have other questions.

Take care,

Joe

See pics below.
Images (Click to enlarge)
Attached Media
Attached Media
Jan 24, 2024 at 7:09 PM
Avatar
VOLCER10
  • MEMBER
  • 2 POSTS
Thank you.
Also, would you know what TIPM connect the ambient temperature sensor goes to?
Jan 24, 2024 at 7:11 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
Hi,

Are you referring to the intake or HVAC? Chances are it isn't powered directly from the TIPM. Instead, power is likely coming from a body control module or HVAC module.

Let me know which one is the concern.

Take care.

Joe
Jan 24, 2024 at 7:47 PM