Serpentine belt?

2008 CHEVROLET EQUINOX
200,000 MILES • 3.6L • 6 CYL
Avatar
ANTAINE
  • MEMBER
  • 3 POSTS
I was asked to help with an alternator change, but they had cut the belt off before I got there, and it looks like it goes around a lower motor mount but I'm unsure. it's a Sport model.
Jul 23, 2023 at 5:54 PM
Advertisement
Avatar
ANTAINE
  • MEMBER
  • 3 POSTS
The 3.4 and 3.6 have different placements and I can't find any info other than the diagram for 3.6.
Jul 23, 2023 at 6:02 PM
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
Hi,

If you are working with a 3.4, you are correct. The routing is different. If you look below, I attached the belt routing diagram for the 3.4L, take a look at it and let me know if that is what you needed.

I don't know if you need it, but here is a link you may find helpful:

https://www.2carpros.com/articles/replace-serpentine-belt

Let me know if this helps.

Take care,

joe

See pic below.

Image (Click to enlarge)
Attached Media
Jul 23, 2023 at 9:04 PM
Advertisement
Avatar
ANTAINE
  • MEMBER
  • 3 POSTS
I'm working on a 3.6 and all I can get for it is the pattern. Just don't know if I have to take off a lower motor mount that seems to be between the pulleys.
Jul 24, 2023 at 4:08 AM
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
Hi,

On the 3.6L, the engine mount bracket on the right-side needs removed for the belt.

If you look below, I attached the directions for you. Also, the belt routing for the 3.6L is included in the directions.

Let me know if this helps or if you have questions.

Take care,

Joe

See pics below.
Images (Click to enlarge)
Attached Media
Attached Media
Attached Media
Attached Media
Attached Media
Jul 24, 2023 at 9:01 PM