blinker wire diagram or color code for hot and ground

turn signal for rear is lt blue and for lights it's green

ground is brown at light

Looking at the schematic, both sides provide power through a red wire. The ground appears to be a white / black wire. Check the white / black for continuity to a known ground.

I am adding a arrow light to my side mirrors at 2103 Camry Se, and i did the driver side with front wire color , but i have problem with passenger side i did all the step up mention my friends and every time hook wire relay of car right stop to respond and no sound no nothing than i touch mostly blue wire did not working .
Now one of the person he hook and it working fine but it miss place like when i press brake the right side signal light stop and when i release brake it work fine, please in any one knows answer or picture will help mostly wire i cut and try to find but not any easy way will glad thank you.
Malik

Okay, now that I understand what you are doing I may be able to help more. Have you run the power supply wire from the signals to the mirrors? How have you provided a ground?

As far as the wiring schematic., I can't copy and paste it for you, but I can answer specific questions you have.

Yes the arrow light working fine by it self and so do the wiring ! but i think the person it self put the ground with back brake light , the signal of car work fine but only the arrow light stop blinking when you push brake.
I just need to know what color the wire i need to attach with what color in 2013 Camry Se, 2.5 engine , I try all of wire right side of car door panel and there is nothing on right side , i did get 2 wire for the driver side signal and right away it work fine and nothing problem so far but the passenger side the tech screw up , i am worry because i did not need more problem, car is new and warranty but you know how dealer are ?
Please inform me what wire i add to the door panel where i can get get ground, the wire of arrow with it self when i hook with hot wire right away i check the tester the hot is GREEN power and other wire of arrow is getting power too , than i touch the ground with white/black wire the relay stop of car to respond and no signal light, so i stop car for few moment and pc of car with it self re set and start again , i am really up set that which wire i connect so get signal work with self ?
Malik

Since my schematic is showing a white/black wire as a ground, that is what I would suggest. However, since you know the correct power supply is used, just run a new (separate) ground for the new signal lights.

Ok i will try this Friday 16th of Jan and will let yo know and also i am going to send you the pictures ok.
Any way thanks for respond and help it help me .
Take Care
Malik

Glad to help.

Expert you really perfect and good , i follow your step and i get it thank you i wish i can pay you 50$ which i payed to that stupid , any way its a part of life , best of luck and thank you.Jacobandnickolas

Excellent!!! I'm glad you got it fixed. Let me know if I can help in the future.

Joe

2013 Camry Se , i add twitters front while adding it i think i short wires at passenger side, i cancelled the twitters now found it rears speakers which i added new working fine front speakers driver side working perfect only only the passenger side speakers at front dash one and at the foot not working .
Please give me advice what to do ? because i checked all the fuse OK, i see the wring are perfect i add ground it working but making too much noise .

Please post your question here

https://www.2carpros.com/questions/new

Cheers, Ken