Replacing the thermostat?

1994 FORD RANGER
130,000 MILES • 3.0L • 6 CYL • 2WD • MANUAL
Avatar
DJALT1
  • MEMBER
  • 3 POSTS
Hello,
i am trying to replace the thermostat on my truck. The mounting bracket has 2 mounting bolts, the right one is easily accessed but there is an interference to the left one because of an overhanging chrome colored tube directly about the mounting bolt. I need to know how to remove that tube, so i can access the left most bolt.

i am not sure how to attach a photo to this site.
Aug 21, 2022 at 12:45 PM
Advertisement
Avatar
DJALT1
  • MEMBER
  • 3 POSTS
Here is a picture of the thermostat mounting !
Image (Click to enlarge)
Attached Media
Aug 21, 2022 at 2:12 PM
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
Hi,

I see an A/C line and a small metal tube on the rear. I checked the manual and there is nothing related to the removal of either of those.

I have a question. If you remove the upper hose, it appears you may be able to get a socket down on the bolt. You may need to use a wobble extension. Actually, I would use a quarter-inch drive socket, extension, and ratchet. Also, I noticed in the directions the upper radiator hose is removed first. Try that and see if you can get to it.

Take a look at the directions below. Nothing is mentioned. I suspect once the hose is removed, you will be able to access it.

Let me know.

Joe

See pics below.
Images (Click to enlarge)
Attached Media
Attached Media
Aug 21, 2022 at 8:39 PM
Advertisement