Removal of VCP

Hi,

To the best of my knowledge, there are no locks. Is it something that was added? Here are the directions I have for removal, but I feel you already did this. See if they help and let me know.

________________________________

2001 Ford Truck Windstar V6-3.8L VIN 4
Floor Console - Video System
Vehicle Body and Frame Interior Moulding / Trim Console Service and Repair Procedures Floor Console - Video System
FLOOR CONSOLE - VIDEO SYSTEM
REMOVAL



pic 1



1. Release and remove the Video Cassette Player (VCP).

NOTE: To release the video cassette player (VCP) the release push latch must be depressed.



pic 2



2. Remove the storage bin pad.



pic 3



3. Remove the video system console screws.



pic 4



4. Remove the video system console.
^ Disconnect the electrical connectors.

INSTALLATION
1. To install, reverse the removal procedure.

__________________

Let me know.
Joe

Thanks for getting back to me.

The lock appears to be OEM I'm guessing, as there is a Ford anti-theft sticker attached to face of the Daewoo VCP. Saying that 'This device is not removable'

Like you, i haven't been able to find any information on it, so not sure how to continue.

Will check under vehicle for a bolt or remove center console cowling, more likely there's

Thanks anyway,
Ken

If I recall, there were anti theft screws that are to be removed by the dealer when it was new. Interestingly, if you look at pic 1, it says it need taken to a dealer if it won't release. Ugh!

Let me know if you find the solution.

Joe