Rear wheel bearing goes out after changing

1998 FORD F-150
200,000 MILES • 4.6L
Avatar
MICHAELG85
  • MEMBER
  • 2 POSTS
Replaced my rear driver side wheel bearing. I inspected the axle and housing for any damage but saw none. Once I took it on a test drive the new bearing failed within five miles. Not sure why it has failed.

Replaced the passengers side also and it is just fine.
Aug 5, 2019 at 8:14 PM
Advertisement
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
Good evening,

Do you have the bearing that presses into the housing or is it pressed on the axle?

What do you mean by failed?

Roy
Aug 6, 2019 at 3:38 PM
Avatar
MICHAELG85
  • MEMBER
  • 2 POSTS
It presses onto the housing, and failed meaning completely destroyed. Bearings where all laying inside the housing and the metal was broken into at least 3 parts.
Aug 7, 2019 at 4:14 PM
Advertisement
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
Check for a bent axle. There is too much stress on the bearing.

Roy
Aug 7, 2019 at 5:59 PM