Power steering, how to add fluid?

2012 FORD FOCUS
119,000 MILES • 4 CYL • 2WD • AUTOMATIC
Avatar
GILLEIJA08
  • MEMBER
  • 3 POSTS
I know that this car doesn’t have a reservoir for the power steering. It’s leaking though, and I was wondering if there was any way to add it into the system anyway. I know it’s an electric power assist, I just need it to hold some more for a little longer, is there any way to add some?
Sep 22, 2023 at 1:43 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
Hi,

Are you sure it is power steering fluid? Most vehicles with electric power steering (EPS) do not have a traditional power steering fluid reservoir as you mentioned or use hydraulic fluid like those with hydraulic power steering systems. Instead, EPS systems use an electric motor to assist with steering, and there is no fluid to be added or maintained.

Where are you seeing the leak? Are you having problems with the steering assist? I remember a technical service bulletin (TSB) instructing software updates for the power steering control module (PSCM) if stiffness is a symptom.

Let me know.

Joe

Sep 22, 2023 at 2:49 PM
Avatar
GILLEIJA08
  • MEMBER
  • 3 POSTS
It was light red.
Images (Click to enlarge)
Attached Media
Attached Media
Sep 22, 2023 at 2:56 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
Hi,

In the picture, you are pointing at the axle seal. That is likely transmission fluid. Do me a favor and check the ATF level to see if it is low. Note that a small amount of fluid will appear large.

Let me know what you find.

Take care,

Joe
Sep 22, 2023 at 3:20 PM