Code P0902, possible transmission issues?

2015 FORD FIESTA
80,000 MILES • 1.6L • 4 CYL • 2WD • AUTOMATIC
Avatar
ETERNALARIANNE
  • MEMBER
  • 203 POSTS
My friend has this car and about 2 weeks ago the check engine light came on and she said the car "didn't want to go". I plugged in a code scanner and got P0902. I cleared the error, and she says it's been fine since.

Today she says when she cranked it up, the traction control light was on, but it went off after driving a few minutes. No check engine light this time.

Could this be a sign of imminent transmission failure, or could it be easily fixed? I'm not too familiar with Ford myself.
Sep 5, 2024 at 5:49 AM
Advertisement
Avatar
STRAILER
  • CERTIFIED EXPERT
  • 53,854 POSTS
The P0902 code refers to a "Clutch Actuator Circuit Low" which is a common problem because the clutch actuators can go out and cause this issue. I would replace both clutch actuators, they even sell them as a kit which is helpful. Clear the codes once the job is completed. Check out the images (below). Please let us know what happens.
Images (Click to enlarge)
Attached Media
Attached Media
Attached Media
Attached Media
Attached Media
Attached Media
Attached Media
Attached Media
Attached Media
Attached Media
Sep 5, 2024 at 10:02 AM
Avatar
ETERNALARIANNE
  • MEMBER
  • 203 POSTS
Thanks for the reply. Would this cause the traction control light to come on then go off?
Sep 5, 2024 at 10:07 AM
Advertisement
Avatar
STRAILER
  • CERTIFIED EXPERT
  • 53,854 POSTS
Yes, it could, if not then the traction control problem is not related, but one thing at a time.
Sep 5, 2024 at 10:21 AM
Avatar
ETERNALARIANNE
  • MEMBER
  • 203 POSTS
Okay, I'll let her know the price of the actuators, might be a bit for her due to cost.
Sep 5, 2024 at 10:41 AM
Avatar
STRAILER
  • CERTIFIED EXPERT
  • 53,854 POSTS
no worries, have a good weekend.
Sep 6, 2024 at 11:05 AM
Avatar
ETERNALARIANNE
  • MEMBER
  • 203 POSTS
Sorry to resurrect this old question, but she never replaced the actuators since it has ran fine since then. Until today it popped the code again. Both times it has been extremely hot outside and she has driven for about an hour. Could heat cause this issue?
Jul 8, 2025 at 3:51 PM
Avatar
STRAILER
  • CERTIFIED EXPERT
  • 53,854 POSTS
Yes, if parts or going to fail, it will be in the heat. I would do the actuators.
Jul 8, 2025 at 3:52 PM
Avatar
ETERNALARIANNE
  • MEMBER
  • 203 POSTS
Ok thanks. I'll see if I can convince her to do it, lol.
Jul 8, 2025 at 3:53 PM
Avatar
STRAILER
  • CERTIFIED EXPERT
  • 53,854 POSTS
Sounds good, nice to hear from you again :)
Jul 8, 2025 at 3:59 PM
Avatar
ETERNALARIANNE
  • MEMBER
  • 203 POSTS
I'm back again she is finally going to get them replaced soon. I know you sent me the diagrams but how difficult is this job actually? Can I get to it from underneath the car, or do I have to drop the transmission? I've seen online the dealer charges $2600 to fix it.
Apr 22, 2026 at 11:30 AM
Avatar
STRAILER
  • CERTIFIED EXPERT
  • 53,854 POSTS
That seems steep to me, you don't need to remove the transmission. You can get to the actuators one from up top and the other from below. I believe they may make a kit that does this. Please check rockauto.com
Apr 23, 2026 at 7:44 AM
Avatar
ETERNALARIANNE
  • MEMBER
  • 203 POSTS
Ok thanks. I see on rock auto it's called "shift interlock solenoid" but the part looks the same.

One last thing, I was reading about a relearn process after replacing these? Something about it might jerky for a bit until it learns the new solenoids? Is that correct?
Apr 24, 2026 at 5:51 AM
Avatar
STRAILER
  • CERTIFIED EXPERT
  • 53,854 POSTS
Yes, the computer will need to relearn the adaptation which will happen after driving the car for a while, let me know what happens.
Apr 24, 2026 at 7:59 AM