Code P0117, coolant sensor

This code indicates the voltage is not correct, which most of the time is the sensor or the sensor connection. here is the correct way to replace the sensor with instructions in the diagrams below to show you how. Also did you clear the codes after the work was done? Check out the diagrams (below). Let us know what happens and please upload pictures or videos of the problem.

I don't know how to clear the codes. I also see that the guy hired to come to the house did not partially remove some coolant before removing the sensor. Also, I just noticed there is a hose disconnected. see photo. I have no idea where that goes. I had taken the car to a mechanic, and he didn't speak much English I think he disconnected my hose. Now the engine light blinks when I turn on the car. I can't get the P0117 to show any more after turning the key three times.

The large hose goes to the brake booster, do not drive the truck until corrected. here is how to clear the codes please watch this video:

https://youtu.be/ahK_eucFi-k

Let me know what happens.

Thanks, I figured it out, then I took the van to a mechanic. It's something that has to be handled after the van is raised up. That's why it keeps over heating/engine light.

Nice work, we are here to help, please use 2CarPros anytime.