No power to fuse

2016 CHEVROLET IMPALA
61,000 MILES • 3.6L • V6 • 2WD • AUTOMATIC
Avatar
EVANGONZALES89
  • MEMBER
  • 5 POSTS
Trunk not opening with remote, or button on dash. Keyless entry for trunk as well. Relay clicks . Used dmm to test fuse and the 10 amp fuse is not getting power (fuse is good).
Aug 9, 2020 at 1:02 PM
Advertisement
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
Good afternoon,

The trunk release is controlled by a different fuse. I attached the diagram for you to view.

Is this the fuse you tested for power?

https://www.2carpros.com/articles/how-to-check-a-car-fuse

https://www.2carpros.com/articles/how-to-check-wiring

Roy
Images (Click to enlarge)
Attached Media
Attached Media
Attached Media
Aug 9, 2020 at 2:59 PM
Avatar
EVANGONZALES89
  • MEMBER
  • 5 POSTS
It didn't let me specify that it was a limited edition. Old body style. The fuse pattern is not the same....
Aug 9, 2020 at 3:38 PM
Advertisement
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
Can I have the complete VIN number?

Roy
Aug 9, 2020 at 3:47 PM
Avatar
EVANGONZALES89
  • MEMBER
  • 5 POSTS
Here is the VIN. Thanks in advance for trying to help me.
Image (Click to enlarge)
Attached Media
Aug 10, 2020 at 6:38 AM
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
I attached a diagram for the trunk release based on your VIN. The body control module is what controls the operation based on the input from the switch or the remote.

Roy
Image (Click to enlarge)
Attached Media
Aug 10, 2020 at 6:50 AM
Avatar
EVANGONZALES89
  • MEMBER
  • 5 POSTS
So you think there might be a issue with the BCM itself?
Aug 10, 2020 at 7:09 AM
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
Correct. You would need a scan tool that can read live data from the BCM to be sure it see the signals from the switch and the remote.

Roy
Aug 10, 2020 at 7:19 AM
Avatar
EVANGONZALES89
  • MEMBER
  • 5 POSTS
10-4 thanks Roy. I'll let you know and results.
Aug 10, 2020 at 7:26 AM
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
You are welcome.

always glad to help.

Roy
Aug 10, 2020 at 7:49 AM