No condition to start, no voltage in injectors

Hello,

Here is a guide to help you check the power and grounds for the PCM and the engine wiring diagrams to help you do some testing to find out what the problem is:

https://www.2carpros.com/articles/how-to-check-wiring

Check out the diagrams (below). Please let us know what happens.

Cheers, Ken

Hello. Thanks so much. I will reply with result of the job in four days.
Good day.

Please let us know what you find. We are interested to see what it is.

Hello. Sorry, but I do not know if the problem is in injector driver or not? My Pagero gdi, 3.5 ltrs, 6G74, from 1997, V25W have a injector driver connector with 26 pins. 7 from ECU to injector driver, 6 i think to control ground injector in injector driver and 1 which I do not know, but are in 91? position of the ECU terminal.
12 to injector driver to injector, 6 are ground and other 6 it should be posetive, but now without any voltage.
Other 6, 3 of them have 12 volt and other 3 are ground, and all have continuity in 2 terminal. And the last pin is empty.
Is it possible which the wire in position 91? Of the ECU control the injector driver transistors?
Sorry for my English.
Niko

Pin 91 is for stick shift so do not concern over that. I would check the engine control relay. Here is a guide to help:

https://www.2carpros.com/articles/how-to-check-an-electrical-relay-and-wiring-control-circuit

They also call the engine relay a PCM relay. Check out the diagrams (below). Please let us know what happens.

Cheers, Ken