1991 Nissan 240SX Engine starting

Probably your clutch safety switch is missing the gromet on the pedal so when you press the clutch it isnt flipping the switch... i taped a penny over the hole so i wouldnt have to worry about replacing a gromet after it wears out

correction... sorry didnt see u had an automatic...

[quote:193445e7ce="uconn"]Electrical problem
1991 Nissan 240SX 4 cyl Two Wheel Drive Automatic
----------------------------------------------------------------
I turn the key and get nothing. Battery checks good and the cables are clean and tight at the battery, starter and ground. I have 12+ volts at the starter. Dash lights come on when the key is turned.[/quote:193445e7ce]

Hey....i had the SAME problem one night...it doesnt turn over....and you can hear the relays when you attempt to turn over....i dont know if its the same problem i had...but i took the ignition switch outta the back of the lock cylinder....and you just turn the switch with a screw driver and it starts. Lemme know if that works for ya. If it is that then you'll need a new switch and or lock cylinder