Engine stalls at idle

2006 MITSUBISHI GALANT
206,000 MILES • 1.0L • 4 CYL • 2WD • AUTOMATIC
Avatar
BRITT99
  • MEMBER
  • 1 POST
I just got my fluids topped off yesterday (oil, brake etc.,) and a filter change. No problems driving, in fact the ride was very smooth. Today I got my front tires changed, nobody went under the hood. I drove off and was sitting at a stop light and my car stalled. The oil and battery lights came on. I put on my hazards and started the car up and it came right on. two minutes later it happened again. still at this stop light. I cranked it up again and drove off when the light turned green and went home. In front of my house I put the car in park and waited. Sure enough about three minutes later it happened again. I have to travel three hours today and not sure if I should go. Can you tell me what could be causing this?
Feb 5, 2017 at 7:55 AM
Advertisement
Avatar
KASEKENNY
  • CERTIFIED EXPERT
  • 18,907 POSTS
First thing we need to check for codes. Here is a guide that will help do this:

https://www.2carpros.com/articles/checking-a-service-engine-soon-or-check-engine-light-on-or-flashing

As for the possible causes if there are no codes the most likely cause is the idle control valve.

https://www.2carpros.com/articles/stall-at-idle

Here are some more guides that will talk more about this:

https://www.2carpros.com/articles/idle-air-control-valve-service

https://www.2carpros.com/articles/how-to-replace-an-idle-speed-control-motor-iac

I am attaching the process on how to relearn the idle and initialization process if you need to replace it.

Let's run through this material and go from there. Thanks
Feb 3, 2021 at 4:23 PM