2001 Mercury Marquis Driver Door Power Window (Door Panel R

2001 MERCURY MARQUIS
48,000 MILES • V8 • 2WD • AUTOMATIC
Avatar
MMOBLEY
  • MEMBER
  • 1 POST
I have all the screws out of the door panel and am not sure where to pry up the ultra cheap squeaky plastic panel cover without wrecking the panel. Is there a trick to this? Thanks.
Jul 11, 2008 at 8:50 AM
Advertisement
Avatar
MERLIN2021
  • CERTIFIED EXPERT
  • 17,250 POSTS
Use a door trim tool...like this


https://www.2carpros.com/forum/automotive_pictures/62217_Trim_Panel_001_2.jpg


https://www.2carpros.com/forum/automotive_pictures/62217_Trim_Panel_002_3.jpg


https://www.2carpros.com/forum/automotive_pictures/62217_Trim_Panel_003_2.jpg


https://www.2carpros.com/forum/automotive_pictures/62217_Trim_Panel_004_2.jpg


https://www.2carpros.com/forum/automotive_pictures/62217_Trim_Panel_005_2.jpg


https://www.2carpros.com/forum/automotive_pictures/62217_Trim_Panel_007_2.jpg


https://www.2carpros.com/forum/automotive_pictures/62217_Trim_Panel_014_3.jpg


https://www.2carpros.com/forum/automotive_pictures/62217_Trim_Panel_015_2.jpg


https://www.2carpros.com/forum/automotive_pictures/62217_Trim_Panel_018_2.jpg


https://www.2carpros.com/forum/automotive_pictures/62217_Trim_Panel_021_4.jpg

Gently pull panel as yoy remove the clips, to see the two inside by the door handle, I pop them as I go and know the pins out so they don't re-grab the clip...
Jul 11, 2008 at 9:00 AM