My standered 1994 Mazda mx6 won't stay in gear.
Aug 1, 2007 at 10:39 AM
1994 Mazda mx6
1994 MAZDA MX5
DONNIE014
- MEMBER
- 2 POSTS
- FOLLOW
Advertisement
Will give it a try. I have a carb kit in my garage for just such an occasion.Thanks!! Dave
Aug 1, 2007 at 4:44 PM
Hi and thanks again.
I replaced the accelerator pump, and still have the same problem.
Will try your timing suggestion.
It's strange; it occurs 3-4 miles after startup, and only when accelerating. When "cold", the truck runs and accelerates fine, but warms up then nearly dies upon acceleration, especially above 40 mph. Feathering the accelerator will allow me to limp back home, but any normal acceleration causes the engine to stumble and/or die.
I'm very grateful for your help, any other suggestions would be appreciated as well! Thanks again, Dave
I replaced the accelerator pump, and still have the same problem.
Will try your timing suggestion.
It's strange; it occurs 3-4 miles after startup, and only when accelerating. When "cold", the truck runs and accelerates fine, but warms up then nearly dies upon acceleration, especially above 40 mph. Feathering the accelerator will allow me to limp back home, but any normal acceleration causes the engine to stumble and/or die.
I'm very grateful for your help, any other suggestions would be appreciated as well! Thanks again, Dave
Aug 6, 2007 at 11:05 AM
Advertisement
I assume it has an automatic choke? Is it in good working order?
Aug 6, 2007 at 9:19 PM
[quote:a722b6cbf7="Indyuke"]I assume it has an automatic choke? Is it in good working order?[/quote:a722b6cbf7]
Aug 8, 2007 at 11:37 AM
choke is working properly. Still acting up. Any other suggestions?
Sep 28, 2007 at 5:19 PM