1993 Mazda b2600 Wont start after cleaning engine

Hi Rick Galasyn, Welcome to 2carpros and TY for the donation

What you need to determine is if its getting fuel or spark-you need to establish this. Do below and come back with some results

Hi Rasmataz

Do not have Hi-V out of the coil.
Do have twelve volts in.

Rick






[quote:fd83852d89="rasmataz"]Hi Rick Galasyn, Welcome to 2carpros and TY for the donation

What you need to determine is if its getting fuel or spark-you need to establish this. Do below and come back with some results we start here

Get a helper disconnect a sparkplug wire or 2 and ground it to the engine at least 3/16 away from ground -have helper crank engine over-do you have a snapping blue spark? If so-you have a fuel related problem, check the fuel pressure to rule out the fuel filter/fuel pump/pressure regulator and listen to the injector/s are they pulsing or hook up a noid light. No snapping blue spark continue to troubleshoot the ignition system-power input to the coil/coil packs,coil's resistances,distributor pick-up coil, ignition control module, cam and crank sensors and computer Note: If it doesn't apply disregard it[/quote:fd83852d89]

Do not have Hi-V out of the coil.
Do have twelve volts in.

No secondary surge voltages: Continue to troubleshoot the ignition system-power input to the coil/coil packs,coil's resistances,distributor pick-up coil, ignition control module, cam and crank sensors and computer Note: If it doesn't apply disregard it.