Labor Time Needed Remove and Replace the Transmission?

1998 CHRYSLER TOWN AND COUNTRY
136,000 MILES • 3.8L • V6 • 2WD • AUTOMATIC
Avatar
SANDSTORM1958
  • MEMBER
  • 35 POSTS
Finally diagnosed our transmission problem after a swap. After testing every possible scenario for the DTC P0733, P0734 I realized the RPMs shot up on upshifting to gears 3,4. The Valve Body Is Shot. I ordered everything needed but determined this is beyond my expertise level so will have a shop do the work (dealer has same hourly as the idiots who installed the transmission). I need to know what mechanic labor time is, can't find a simple answer online as usual. Flat Rate Time is okay.
Feb 24, 2024 at 2:35 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
Hi,

Two different transmissions may have been used. One is a three-speed and the other a four-speed.

If you look below, I attached labor rates for both.

Take a look and let me know if this is what you need.

Take care,

Joe

See pics below.
Images (Click to enlarge)
Attached Media
Attached Media
Feb 24, 2024 at 8:12 PM
Avatar
SANDSTORM1958
  • MEMBER
  • 35 POSTS
41TE/A604 4spd FWD.Thanks
Feb 24, 2024 at 8:34 PM
Advertisement
Avatar
SANDSTORM1958
  • MEMBER
  • 35 POSTS
41TE/A604 4spd FWD. Thanks, but not what I needed to know. Only the replacement of the Valve Body.
Feb 24, 2024 at 8:37 PM
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
Hi,

That's a much easier job. LOL I attached the flat rate below. Let me know if this is what you need.

Take care,

Joe

See pic below.
Image (Click to enlarge)
Attached Media
Feb 25, 2024 at 6:27 PM