What is the easiest way to change the inlet air actuator?

i changed the actuator that is in the front middle of the dash but i still have the same clicking noise. Thanks

They can be difficult to change depending on which one needs to be replaced, when the clicking noise is occurring, see if you can feel which one is making the noise. You can remove the glovebox to help gain access and I have all of the actuator locations in the images below. Check out the images (below). Let us know what happens and please upload pictures or videos of the problem so we can see what's going on.

It's the actuator that's on the firewall of course how do you change this one without a lot of work? i don't feel anything on the other two actuators. Thanks

i only hear the clicking noise after I've been driving awhile not when i first start the truck i tried all controls to hear the noise but no such luck.

Yep, some actuators are in a bad spot and will take some effort to change it. It is common for the actuator to click at different times, can you please turn the HVAC system off to see if you still hear the noise?

i hear the noise with the A/C on or off. sir, do i have to pull out the HVAC too to change that actuator? Thanks

i only hear the noise when I'm driving not when i start it up.

The noise might not be an actuator, can you shoot a short video of the noise and upload it with your response please?