How would I hot wire or manually trigger parking brake module?

Hi,

I would be happy to provide a wiring schematic for you, but this procedure should be done using a bidirectional scanner that can actuate the park brakes. My concern is if something becomes damaged.

Let me know.

Joe

Thank you, any wiring schematic would be helpful.

I am trying to retrofit this actuator into a classic car not concerned about damage and don’t have supporting car to actuate with scanner.

If I break it somehow, no worries, I’ll go another direction.

Thanks again.

Hi,

I attached what I have below. Pics two and three are non-OEM and more readable. LOL The remaining is what the manufacturer feels is what we need. Note that I cut the non-OEM pics in half to make it more readable for you. I did overlap them so you can follow from one to the next.

Let me know if this helps.

Joe

See pics below.

Help much appreciated!

Hi,

I'm glad to hear it helped. Take care of yourself and feel free to come back anytime in the future.

Joe

Thanks again Joe. Any idea what AMP draw the motor in this actuator is?

Hi,

That should be a 12v signal (B+). If you apply 12v and it seems to run extremely fast, cut the power and drop it to 5v. However, if I recall, it is 12v.

Let me know how things work out for you.

Take care,

Joe