How to remove front bumper brackets?

2015 CHRYSLER 200
15,000 MILES • 6 CYL • 2WD • AUTOMATIC
Avatar
YAMCHA208
  • MEMBER
  • 2 POSTS
Replacing the front bumper after a collision, the bumper is broken and needs to be replaced. there not bolted but I'm just not sure how they are fastened or how to remove.
Feb 3, 2024 at 12:38 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
Hi,

I'm not sure if you are referring to the bumper cover or steel bumper/bumper mounts.

If it is the mounts/steel bumper, 4 bolts on each side of the bracket hold it in place. See pic 1 below.

If you are referring to the bumper cover, the remaining pictures explain how it is removed. Installation is the opposite of removal.

Let me know if this helps.

Joe

See pics below.
Images (Click to enlarge)
Attached Media
Attached Media
Attached Media
Attached Media
Attached Media
Attached Media
Attached Media
Feb 3, 2024 at 4:29 PM
Avatar
YAMCHA208
  • MEMBER
  • 2 POSTS
I meant the bumper brackets that are under the head light assembly, sorry.
Feb 3, 2024 at 7:16 PM
Advertisement
Avatar
YAMCHA208
  • MEMBER
  • 2 POSTS
I ment the bumber brackets that are under the head light assembly, sorry
Images (Click to enlarge)
Attached Media
Attached Media
Feb 3, 2024 at 7:18 PM
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
Hi,

No problem whatsoever. Is it possible for you to take a pic of what you are referring to and upload it for me to see? I suspect the fascia will need to be removed to access anything under it, but anything is possible.

Let me know.

Joe
Feb 4, 2024 at 6:22 PM