1993 Geo Metro TIMING

1993 GEO METRO
Avatar
JACK W
  • MEMBER
  • 5 POSTS
Engine Mechanical problem
1993 Geo Metro Two Wheel Drive Manual 109000 miles

kI UNDERSTAND THE TOP DEAD CENTER FOR THE TIMEING MARKS ON THE CAM AND THE CRANK SHAFT GEARS BUT IT'S A 1.0 3CYL WHATS THE FIRING ORDER AND WHICH IS THE #1 PLUG? I'll have to take the timing belt all the way off to aligin that up right?
Nov 10, 2008 at 6:21 AM
Advertisement
Avatar
BMRFIXIT
  • CERTIFIED EXPERT
  • 19,053 POSTS


https://www.2carpros.com/forum/automotive_pictures/99387_Graphic1_52.jpg


https://www.2carpros.com/forum/automotive_pictures/99387_Graphic2_29.jpg


https://www.2carpros.com/forum/automotive_pictures/99387_Graphic3_14.jpg

This is your timing marks once you set it up it should be with the marks on remove and install the belt need manual CHECK IT @ http://www.2carpros.com/kpages/auto_repair_manuals.htm
Nov 10, 2008 at 6:36 AM
Avatar
RASMATAZ
  • CERTIFIED EXPERT
  • 75,992 POSTS
You need to stay in one post this is your 3rd one with the same problem Put the engine no. 1 piston on its compression stroke-align markings and make sure the rotor is pointing at no.1 cap tower if not your 180deg off


https://www.2carpros.com/forum/automotive_pictures/12900_fo_22.jpg

Nov 10, 2008 at 6:38 AM
Advertisement