Fuel line replacement product question

1999 PONTIAC GRAND PRIX
275,834 MILES • 3.8L • V6 • 2WD • AUTOMATIC
Avatar
JR47
  • MEMBER
  • 114 POSTS
I'm going to be replacing my fuel lines but would like another opinion about about a product. Would it be safe to install lines that come in three piece sections and make up a single line compared to a single one piece line? The lines are pre bent to factory spec and I have a photo of the lines in question. Any opinions about them would be appreciated.
Image (Click to enlarge)
Attached Media
Mar 11, 2020 at 7:13 PM
Advertisement
Avatar
SCGRANTURISMO
  • CERTIFIED EXPERT
  • 4,897 POSTS
Hello,

Absolutely. The only drawback to this is you will have three spots that could fail easier then a one piece design. On the plus side, though, the ease of installation will be greatly enhanced. Personally, I don't see any problem with it other than that, and that is minimal.

Thanks,
Alex
2CarPros
Mar 11, 2020 at 7:29 PM
Avatar
JR47
  • MEMBER
  • 114 POSTS
Hi, thank you for the quick response and your input about those lines.
Mar 11, 2020 at 8:10 PM
Advertisement
Avatar
STEVE W.
  • CERTIFIED EXPERT
  • 15,113 POSTS
Have used that line type myself on a few vehicles. In most cases they can be bought in plain steel or stainless. I've used the stainless ones and they seem to hold up well here in the rust belt. As do the stainless brake lines that come pre-formed.
Mar 12, 2020 at 1:09 AM