Fan belt and water pump replacement

2003 JAGUAR S-TYPE
47,000 MILES • 6 CYL • 2WD • AUTOMATIC
Avatar
AUSTINO
  • MEMBER
  • 220 POSTS
Good evening. How do I replace the fan belt? Can you tell me step by step how to do so? Be sure to send images if you can please. Just wondering, do I have to remove the water pump in order to replace the fan belt? Thank you for speedy response.
Oct 2, 2018 at 6:00 PM
Advertisement
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
Good morning,

What engine? There is a 3.0 and a 4.2 and they are different procedures.

Roy
Oct 3, 2018 at 4:29 AM
Avatar
AUSTINO
  • MEMBER
  • 220 POSTS
Good evening it has a V6 engine.Thank you.
Oct 3, 2018 at 4:38 PM
Advertisement
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
They are both V6 engines. see if you have a engine tag under the hood. That will tell you the engine size.

Upload a picture if you can of the engine.

Roy
Oct 4, 2018 at 2:25 AM
Avatar
AUSTINO
  • MEMBER
  • 220 POSTS
Good evening, the vehicle has a 3.0 engine. Thanks for the information.
Oct 5, 2018 at 2:08 PM
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
Accessory Drive Belt 2.5L/3.0L
Removal
1. Disconnect the battery ground cable.
2. Remove the air deflector.


imageOpen In New TabZoom/Print


3. Remove the accessory drive belt.
1. Rotate the accessory drive belt tensioner counter-clockwise.
^ Use a 3/8 inch square drive bar to rotate the accessory drive belt tensioner.

2. Remove the accessory drive belt.

Installation
1. To install, reverse the removal procedure.
Images (Click to enlarge)
Attached Media
Attached Media
Oct 5, 2018 at 2:13 PM
Avatar
AUSTINO
  • MEMBER
  • 220 POSTS
Thank you.
Oct 5, 2018 at 2:15 PM
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
You are welcome.

Always glad to help.

Roy
Oct 7, 2018 at 6:13 AM