EVAP purge tube snapped in half

1998 CHEVROLET VENTURE
248,301 MILES • 3.4L • V6 • 2WD • AUTOMATIC
Avatar
KATRINA RANDKLEV
  • MEMBER
  • 8 POSTS
While trying to replace the thermostat last night, I unknowingly was putting pressure on the EVAP purge tube and it snapped in half about 1/4" before the EVAP service port.
I cannot for the life of me find a replacement tube, except for online and that is not an option due to not having a debit card.
I am wondering if there is a splice or piece of tubing that would work to plug the 2 broken ends into that would work as a temporary fix?
Image (Click to enlarge)
Attached Media
Feb 23, 2021 at 5:50 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
Hi,

Here is what to do: First, that us under very low pressure. Run to the parts store and get a piece of rubber high-pressure fuel line or a rubber hose that will fit over each end of the broken hose tightly. Most parts stores sell it by the foot. Cut it to length and then snug a clamp on both sides. Do not over-tighten it because it will crush the plastic pipe.

Let me know if that helps or if you have other questions.

Take care and God Bless.

Joe

Feb 23, 2021 at 8:15 PM
Avatar
KATRINA RANDKLEV
  • MEMBER
  • 8 POSTS
Fyi. Yes! A piece of 1/4" high pressure fuel line worked perfect.
Thank you very, very much!!
I greatly appreciate you.
Feb 27, 2021 at 2:55 AM
Advertisement
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
Katrina,

You are very welcome. I'm glad you got it fixed.

Please feel free to come back anytime you need help or have questions. You're always welcome here.

Take care,
Joe
Feb 27, 2021 at 6:48 PM