Electrical issues after putting jumper cables on wrong

2010 MITSUBISHI LANCER
250,000 MILES • 4 CYL • 2WD
Avatar
ELSHAGGS11
  • MEMBER
  • 1 POST
I have the jumping cables but accidentally put on wrong. I changed the battery and nothing turns on.. but when I give it jumping cables it starts and then shuts off after 2 minutes running. What may the issue be?
Nov 17, 2019 at 11:00 AM
Advertisement
Avatar
DANNY L
  • CERTIFIED EXPERT
  • 5,648 POSTS
Hello, I'm Danny.

It possible you might have shorted one of the fusible links.A fusible link is designed to trip when an electrical overload is applied.They are designed to do that to save all the valuable electrical components in the system.That would happen in your case of hooking up the jumper cables wrong.Here is a tutorial on how to check wiring .

https://www..com2carpros/articles/how-to-check-wiring

I've attached pictures below showing the locations of the fusible links on your car.Hope this helps and thanks for using 2CarPros.
Images (Click to enlarge)
Attached Media
Attached Media
Attached Media
Attached Media
Nov 17, 2019 at 3:58 PM