DTCs=fail

Welcome back. Those codes are indicating that the cam sensors are working but that the cams are both advanced farther than they should be. The most common reason for these codes is low or dirty oil as it causes the solenoids to stick. The first thing to do is check the oil level and/or if the oil hasn't been changed in a while, change it. Be sure to use the correct oil. If that doesn't do anything then the next step would be to use a scan tool to watch the cam timing as you disconnect and reconnect the actuators and see if the cams change in timing. If they do change but you still have the code it is more likely that you have a failing timing chain. If the cams don't change then you would replace the actuators and test again.

Replaced both actuators. After several drive cycles, code has not returned. Thank you again!

Thanks for the update. Glad to hear you got it sorted.