Driver's side door will not open from inside anymore?

here are the instructions on how to fix the inside door handle:

1. Remove trim. Move glass to up position.
2. Remove the watershield as necessary.
3. Disconnect two links at latch.
4. Remove the three inside handle screws.
5. Remove inside handle assembly with links attached.
6. Transfer links to new inside handle.
7. Reverse this procedure to install.

This guide may help as well

https://www.2carpros.com/articles/door-panel-removal

Let us know what happens and please upload pictures or videos of the problem.

Ken, thanks. but the video is not for a 1991 Plymouth Acclaim, can you direct me to the exact model? I don't have electric windows but do have the speaker on the door panel. I was hoping i could just take out the handle and replace it. is that possible to do? Thanks

No, you will need to remove the door panel. Check out the diagrams (below). Let us know what happens and please upload pictures or videos of the problem.

Ken,

Sorry took so long to get back, was away. I will try and send you pictures of the car door panel and inside handle next week. It is very cold here now and there is no heat in the garage, but I should still be able to snap a few pictures. Until then, Thanks

sounds good.