need to replace master/slave assembly

2006 DODGE RAM
Avatar
BRASSYMAN
  • MEMBER
  • 1 POST
I replaced the clutch and flywheel in my '06 3500, 5.9TD Dodge.....but need to replace master/slave assembly, too.....had help with clutch, but none with this....is it a big deal, or "simple"...any schematics, video, or advice would be greatly appreciated!!
Dec 11, 2009 at 8:47 AM
Advertisement
Avatar
DOCFIXIT
  • CERTIFIED EXPERT
  • 18,828 POSTS
The ubit bleeds itself just pump the pedal about 25 times. Not to hard slave remove nuts shown as 1


https://www.2carpros.com/forum/automotive_pictures/198357_Graphic_263.jpg

For master remove pin from pedal the unbolt and remove.


https://www.2carpros.com/forum/automotive_pictures/198357_Grafic_3_78.jpg

Check out the diagrams (Below). Please let us know what you find.
Dec 11, 2009 at 9:20 AM