1996 Dodge Caravan Turn Signals

1996 DODGE CARAVAN
10,000 MILES • 6 CYL • 2WD • AUTOMATIC
Avatar
RICK2829
  • MEMBER
  • 1 POST
Failed completely: left /right, front and back. I have recently disabled the "SILENCER" alarm circuit and during the repair removed both panels below the steering wheel (plastic exterior & metal interior), however turn signals operated for several days afterwards. I don't want to remove them again
- I had a difficult time with parking brake release - but I worry that something came loose under the dash and I don't know what to look for.
Thanks, in advance, Rick
Oct 23, 2010 at 12:00 PM
Advertisement
Avatar
RASMATAZ
  • CERTIFIED EXPERT
  • 75,992 POSTS
Hi Rick, Welcome to 2carpros and TY for the donation Lets start by checking for a loose connection on the junction block SYSTEM OPERATION Combination Flasher Function The Turn Signal/Hazard Warning Flasher is a module providing turn signal, hazard warning functions and has been designed with internal relays to take advantage of low current switching requirements in the vehicle. It is plugged into the Junction Block at positions 4 where all wiring associated with its operation is terminated. The Junction Block is adjacent to and left of the steering column of the vehicle. To gain access to the device, remove the lower steering column cover and knee blocker


https://www.2carpros.com/forum/automotive_pictures/12900_junction_block_1.gif

Oct 23, 2010 at 4:36 PM