1996 Dodge Caravan Newly Replaced Fuel Pump/Filter

1996 DODGE CARAVAN
160,000 MILES • 6 CYL • 2WD • AUTOMATIC
Avatar
REYCRAIG
  • MEMBER
  • 3 POSTS
Hello, I just changed my fuel pump & filter and the van was not getting fuel. I checked and discovered that the pump was not getting power. I jumped the pump and I heard the pump operating. During the jump, I disconneted the main filter output to see if gas will come out and it was just air, not gas. Any advise will be appreciated. God Bless!!
Jul 28, 2008 at 11:41 AM
Advertisement
Avatar
RASMATAZ
  • CERTIFIED EXPERT
  • 75,992 POSTS
Test the auto shut down relay and fuel pump relay to include the PTC 1 9amp.
Jul 28, 2008 at 12:20 PM
Avatar
REYCRAIG
  • MEMBER
  • 3 POSTS
Hello, Thanks for the lightning quick answer. Where exactly is the PTC 1 9amp? I have located the other relays. I am still confused why when direct power is applied to the fuel pump, gas would not pump out. There are quite a few fuel lines. Could there be an configuration problem?
Jul 28, 2008 at 6:16 PM
Advertisement
Avatar
RASMATAZ
  • CERTIFIED EXPERT
  • 75,992 POSTS
PTC 1 9amp is in the junction block-see below Verify the fuel hose fuel return and pressure feed side if okay check the fuel pump you might hear it coming on but not producing pressure-check it


https://www.2carpros.com/forum/automotive_pictures/12900_ptc_1.jpg

Jul 28, 2008 at 8:28 PM