Where are the crank and cam position sensors located?

2007 TOYOTA TUNDRA

252,000 MILES • 4.0L • V6 • 2WD • AUTOMATIC

QWALKER

MEMBER
1 POST
FOLLOW

I am getting a code for my crank and cam position sensors. However, I can't locate either one. There isn't a video or any directions online on how to locate them for a 4.0 v6 engine. Everything I find is for a v8. Any guidance would be useful.

Nov 11, 2023 at 3:36 PM

JACOBANDNICKOLAS

CERTIFIED EXPERT
110,175 POSTS

Hi,

The 4.0L wasn't as popular as the V8. Chances are that is why you can't find the information.

I don't have a video, but if you look below, I attached pics of the locations and the directions for replacing them. Keep in mind, there are two camshaft position sensors, bank 1 and bank 2. Also, they are a bit of a pain to replace.

If this engine still has the original timing chain, there is a chance it is stretched enough to cause a correlation issue between the cam and crank sensors, so keep that in mind.

Let me know if this helps or if you have other questions.

Take care,

Joe

See pics below.

Images (Click to enlarge)

Nov 11, 2023 at 10:21 PM