Code P1564

Welcome to 2CarPros.

Chances are the clock spring isn't the issue, but rather the switch itself is bad. The code is directly related to the automatic speed control device (ASCD) switch on the steering column. What I suggest is to test it to see if that is the problem. Here are the directions related to testing the switch. The attached pictures correlate with the directions. Picture 1 indicates the resistance being checked with each function.

Component Inspection

ASCD STEERING SWITCH
1. Disconnect ASCD steering switch.

picture 1


picture 2

2. Check continuity between ASCD steering switch terminals 1 and 2 with pushing each switch.
If NG, replace ASCD steering switch.
_____________________________________

I don't know if you need them, but here are a few links you may find helpful:

https://www.2carpros.com/articles/how-to-use-a-test-light-circuit-tester

https://www.2carpros.com/articles/how-to-use-a-voltmeter

https://www.2carpros.com/articles/how-to-check-wiring

Let me know the results of the test.

Take care,
Joe

Hello,

This Direct Trouble Code (DTC) is a DTC that deals with your steering switch. It goes bad and causes the problems that you have described in your question. I have included for you in the diagrams down below a diagnostic troubleshooting flowchart from your vehicle's manufacturer for this DTC. Please go through it and get back to us with what you find out. You will need to use a multi-meter so I have included a link below for you to go to if your unfamiliar with how to use one:

https://www.2carpros.com/articles/how-to-use-a-voltmeter

Thanks,
Alex
2CarPros

Alex will do thx

Let us know.

Take care,
Joe