clutch will not disengage

1992 CHEVROLET S-10
16,000 MILES • 2.8L • 6 CYL • RWD • MANUAL
Avatar
KAE
  • MEMBER
  • 3 POSTS
changed master cylinder then changed slave cylinder, bled it for about three hours. when in first gear truck cuts off I have been working on this truck for three days now. please someone help I need some answers soon!!
May 3, 2017 at 12:49 PM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
if it cuts off scan for codes and check fuel pressure with a gauge shold be 9-11 psi also check for a blown gasket beneath tbi unit use choke cleaner if rpm change then it leaks.make sure to have someone check to see if slave is moving it may not move far enough
May 3, 2017 at 12:53 PM
Avatar
KAE
  • MEMBER
  • 3 POSTS
slave cylinder is not moving far enough.
May 3, 2017 at 12:55 PM
Advertisement
Avatar
KAE
  • MEMBER
  • 3 POSTS
i put it in first gear the clutch is not disengaging. it cuts off.
May 3, 2017 at 1:07 PM
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
slave has to be removed to bleed it correctly then reinstalled. See pictures and try that. there are two different versions with/without bleeder screw i am sending both.
Images (Click to enlarge)
Attached Media
Attached Media
May 3, 2017 at 3:14 PM