1998 Chevy Silverado Brake and turn signals

1998 CHEVROLET SILVERADO
Avatar
C3'S ECHO
  • MEMBER
  • 3 POSTS
Electrical problem
1998 Chevy Silverado V8 Two Wheel Drive

Ok I am getting parking lights to the rear lamps but there aren't any brake lights or turn signals. what else is there to check? I have : changed the brake switch, got all new bulbs, checked the fuses, inspected the wires, replaced relay.
Feb 7, 2009 at 10:31 AM
Advertisement
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
Hi Are you getting power to the socket? Is it a printed circuitboard assembly or does it have seperate sockets?

Joe
Feb 7, 2009 at 9:38 PM
Avatar
C3'S ECHO
  • MEMBER
  • 3 POSTS
How you doing? Thank you for asking me if it was seperate sockets or a circuitboard. After I read your question I went out and started looking. I found that the rear lights are a circuitboard. So I inspected the boards and they were damaged. So I replaced them and fixed the problem. Thank you much.
Feb 11, 2009 at 8:31 AM
Advertisement
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
Hi:
It's great to hear back from you. I'm glad it's fixed. If you have questions in the future, let us know.

Take care,
Joe
Feb 11, 2009 at 12:40 PM