2002 Chevy Corvette pulley

2002 CHEVROLET CORVETTE
70,000 MILES • V8 • 2WD • AUTOMATIC
Avatar
REDDOGZ06
  • MEMBER
  • 2 POSTS
I have an idler pulley that has gone bad on the a/c side of my system, instead of replacing just the one pulley, I would like to change all the pulleys just for insurance, and so I don't have to tear into it again. there is a second pulley that is bolted directly to the block, but is not on a tensioner, what is this pulley called? so I can get it ordered along with the others.
Dec 27, 2009 at 3:12 PM
Advertisement
Avatar
DOCFIXIT
  • CERTIFIED EXPERT
  • 18,828 POSTS
Is this figure look like your belt routing?


https://www.2carpros.com/forum/automotive_pictures/198357_Graphic_279.jpg

Dec 28, 2009 at 9:59 AM
Avatar
REDDOGZ06
  • MEMBER
  • 2 POSTS
somewhat yes, however this car has two serpentine beltss, and the pulley in question is not shown, this pulley is part of the a/c system, the a/c has it's own tensioner and belt. this belt circles the crank, a/c compressor, tensioner, and this mystery pulley. it is not part of the main serpentine belt system that drives the water pump, alternator, ect. this vehicle is a 2002 chevrolet corvette with the ls 1 motor 5.7 litre. this pulley also sits on the passenger side of the motor, lower end, and is bolted directly to the block, it does not sit on a tensioner.
Dec 28, 2009 at 7:04 PM
Advertisement