1989 Chevy Blazer NEUTRAL SAFETY SWITCH

Are you trying to replace the neutral switch or ignition? Install like the old switch

[quote:0024a78863="Docfixit"]Are you trying to replace the neutral switch or ignition? Install like the old switch[/quote:0024a78863]

THE OLD SWITCH WAS BURNT AND WIRES DANGLING. WHAT I NEED TO KNOW IS HOW DO I PUT THIS NEW NEUTRAL SWITCH ON THE STEERING COLUMN. I SEE ABOUT WHEREW IT WAS..APPEARS TO BE AN INDENTATION IN STEERING COLUMN.IS THIS WHERE I SNAP IT ON THE COLUMN ? IS THAT SMALL TAB ON SWITCH SUPPOSED TO BE IN WHERE INDENTATION IS ?

What you need is ignition switch not neutral. Glad you told about dangling wires. Any info is helpful as Iam not there and cannot see what is going on.
Are wires in the terminal or is it gone if so big problem. Switch held on by two small bolts and that coat hanger thing Attaches to switch.
You will need pics and wiring diagram so click on site at bottom of reply ie. manuals and get info for the job.

[quote:893bd83c49="Docfixit"]What you need is ignition switch not neutral. Glad you told about dangling wires. Any info is helpful as Iam not there and cannot see what is going on.
Are wires in the terminal or is it gone if so big problem. Switch held on by two small bolts and that coat hanger thing Attaches to switch.
You will need pics and wiring diagram so click on site at bottom of reply ie. manuals and get info for the job.[/quote:893bd83c49]
ok.Let me try and explain a bit better.It is a neutral switch that is gone as I went to junk yard and saw how wires were and put clips on wires so I could cloamp onto new neutral switch.It saYS IT JUST CLAMPS ONTO STEERING COLUMN AND i AGREE IT PROBABLY DOES BUT MY QUESTION IS WHERE AND HOW THEW SWITCH FITS....The slot near bottom of steering column seems to be place to fit it in but is yellow tab supposed to be in slot ?