Car was running good just shut down

2008 BUICK LUCERNE
175,000 MILES
Avatar
JAMES MERRITT
  • MEMBER
  • 6 POSTS
My car will not take a fuse, try to put one in and it blows automatically. I unplugged the fuel pump and ignition module and still hot. What could it be?
Aug 14, 2018 at 7:57 AM
Advertisement
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
Good morning.

What is the fuse number so I can look up what it controls?

Can you verify the engine size?

Roy

https://www.2carpros.com/articles/how-to-check-wiring
Aug 14, 2018 at 8:17 AM
Avatar
JAMES MERRITT
  • MEMBER
  • 6 POSTS
Fuse number 1 engine is 3.8.
Aug 14, 2018 at 8:57 AM
Advertisement
Avatar
JAMES MERRITT
  • MEMBER
  • 6 POSTS
One side of the fuse slot is hot.

Aug 14, 2018 at 9:01 AM
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
Pull out the fuel pump relay and see if it still blows. Fuse 1 controls the fuel pump.

Roy
Aug 14, 2018 at 9:10 AM
Avatar
JAMES MERRITT
  • MEMBER
  • 6 POSTS
When I pull the fuel pump relay no fire goes to fuse number 1.
Aug 14, 2018 at 9:14 AM
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
Okay, from there on, the only thing is the wiring to the fuel pump.

Remove the connector at the fuel pump and see if the fuse still fails. If it does, then you have a wiring issue between the fuse block and the fuel pump.

If it does not fail, you need a fuel pump.

Roy
Aug 14, 2018 at 10:33 AM
Avatar
JAMES MERRITT
  • MEMBER
  • 6 POSTS
I already have the fuel pump unplugged and it still blows fuse. I will check the wires from fuse box to fuel pump.
Aug 14, 2018 at 10:36 AM
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
Okay.
Aug 14, 2018 at 10:43 AM
Avatar
JAMES MERRITT
  • MEMBER
  • 6 POSTS
Thank you so much.
Aug 14, 2018 at 10:47 AM
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
You are welcome.

Keep us updated.

Roy
Aug 14, 2018 at 12:13 PM