Brake lights are not working

1997 PONTIAC FIREBIRD
116,000 MILES • 5.7L • V8 • 2WD • AUTOMATIC
Avatar
D PAYNE
  • MEMBER
  • 4 POSTS
the brake lights do not work, the tail lights work fine and the third brake light in the center of the truck lid works. I change the brake light switch and checked the bulbs and the bulb sockets. any help would be appreciated.
Dec 20, 2016 at 8:32 AM
Advertisement
Avatar
WRENCHTECH
  • CERTIFIED EXPERT
  • 20,761 POSTS
That is most likely a bad turn signal switch. The two lower lights pass through that first so the turn signals can cancel out the brake lights when necessary.
Dec 20, 2016 at 10:55 AM
Avatar
D PAYNE
  • MEMBER
  • 4 POSTS
Okay thanks, I will change that out.
Dec 20, 2016 at 10:58 AM
Advertisement
Avatar
WRENCHTECH
  • CERTIFIED EXPERT
  • 20,761 POSTS
You really should test things before replacing them. You would need a wiring diagram and someone that knows how to read and follow it along with know how to test.
Dec 20, 2016 at 11:02 AM
Avatar
STEVE W.
  • CERTIFIED EXPERT
  • 15,113 POSTS
Okay, if the CHMSL works you can eliminate the primary fuse and the brake light switch. Next item. Do the rear turn signals work? How about the hazard lights?

The brake switch feeds them.
Dec 20, 2016 at 11:02 AM
Avatar
STRAILER
  • CERTIFIED EXPERT
  • 53,854 POSTS
Hey D PAYNE,

Yep a simple test light and this wiring diagram I got for you. Trace the power and see where you loose it then replace or repair as needed.

Here is a guide that will help you as well.

https://www.2carpros.com/articles/how-to-use-a-test-light-circuit-tester

Please let me know how it goes.

Best, Ken
Images (Click to enlarge)
Attached Media
Attached Media
Dec 20, 2016 at 9:52 PM
Avatar
D PAYNE
  • MEMBER
  • 4 POSTS
Thanks Ken for all the info after changing the turn signal switch I have brake lights again thanks again.
Dec 21, 2016 at 3:27 PM
Avatar
STRAILER
  • CERTIFIED EXPERT
  • 53,854 POSTS
Glad you could get it fixed please use 2CarPros.com anytime we are here to help

Best, Ken
Dec 21, 2016 at 10:10 PM