Chevy S-10 blown head gasket

2010 ALL OTHER MAKES ALL OTHER MODELS
Avatar
DOCHAGERTY
  • ✓CERTIFIED EXPERT
  • 9,603 POSTS
My truck popped the head/head gasket. 2000 S-10 2.2L Is this common? Should I fix or replace truck? I am on the fence and I request a push please. Dr. Hagerty
Aug 26, 2010 at 2:45 PM
Advertisement
Avatar
BLUELIGHTNIN6
  • CERTIFIED EXPERT
  • 16,542 POSTS
i had over 200,000 miles on my last s10 i had, 96 model 2.2L , never had a head issue. good lil work truck if you ask me
Aug 27, 2010 at 1:00 AM
Avatar
BRIAN 1
  • CERTIFIED EXPERT
  • 1,030 POSTS
I only replaced a couple,not real common.putting a head gasket on these arent that bad.I would just replace the gasket and check the head with a straight edge for warpage.
Aug 27, 2010 at 1:14 AM
Advertisement
Avatar
MHPAUTOS
  • CERTIFIED EXPERT
  • 31,937 POSTS
Sit on the fence with a bottle of Bundy, (Aussie dark rum) polish it off and you are sure to fall one way or the other,

mark in Aust.....
Aug 27, 2010 at 2:10 AM
Avatar
KHLOW2008
  • CERTIFIED EXPERT
  • 41,814 POSTS
Here in Malaysia because of corruption, the quality of the fence is suspect. Don't be surprised if the fence gives way.
Aug 27, 2010 at 4:08 PM
Avatar
DOCHAGERTY
  • CERTIFIED EXPERT
  • 9,603 POSTS
There a comedian in the group
Aug 27, 2010 at 5:52 PM
Avatar
DOCHAGERTY
  • CERTIFIED EXPERT
  • 9,603 POSTS
Well, I fixed the problem, it was plugged up steam holes in the head gasket. Mechanics dont maitain their own vehicles, so it was my bad. Truck back on the road again, happy happy joy joy
Sep 2, 2010 at 3:59 PM
Avatar
MERLIN2021
  • CERTIFIED EXPERT
  • 17,250 POSTS
did you load the fence in the back? Can't leave anything lying around, EPA will get you!
Sep 4, 2010 at 4:03 PM
Avatar
MHPAUTOS
  • CERTIFIED EXPERT
  • 31,937 POSTS
Drop the fence over here, i need more fire wood.

Mark cold & wet in soggy aussie land.
Sep 5, 2010 at 8:03 AM