I need the timing belt replaced and it runs out of gas at 1/4 tank?

1994 ACURA LEGEND
130,000 MILES • 6 CYL • 2WD • AUTOMATIC
Avatar
MICKEYTL
  • MEMBER
  • 15 POSTS
My car holds a capacity of 16 gallons of fuel tank, but once I reach a quarter of a tank, it sometimes just dies when coming to a complete stop. But it always starts back up. It sometimes just shakes at idle, if it doesn't die. It still has about 2-3 gallons left in the tank. The fuel warning light doesn't even display yet. But when it's above a quarter tank of gas, it runs perfect. This has been a problem for 6 months now.

A few things that have been done to the car within the last 2 yrs.

Fuel pump, fuel sending unit, fuel filter, spark splugs, fuel injectors clean and some suspension work.

My mechanic is stating that I need a new fuel pump, but I already had a new pump installed 1.5 yr. ago.
Let me know what the problem could be...really want to get this problem resolved...Thanks.
Jul 22, 2009 at 6:04 PM
Advertisement
Avatar
BUDDYCRAIGG
  • CERTIFIED EXPERT
  • 2,262 POSTS
I believe that it is a problem in the tank as well.

While I don't completely agree that the pump is bad, i suspect that there is a problem with a hose or filter inside the tank that will show itself when the mechanic is in the process of replacing the pump.
Jul 22, 2009 at 8:34 PM
Avatar
MICKEYTL
  • MEMBER
  • 15 POSTS
Ok, I'm going to have my uncle take the fuel pump out and replace the 2 inch hose and see what the outcome will be...Thanks.
Jul 23, 2009 at 11:48 AM
Advertisement
Avatar
KHLOW2008
  • CERTIFIED EXPERT
  • 41,814 POSTS
Just something to add on.

It is important that the strainer is properly attached and not leaking. Any leaks would cause air to be sucked when the fuel level is not completely dry.
Jul 23, 2009 at 12:07 PM
Avatar
BUDDYCRAIGG
  • CERTIFIED EXPERT
  • 2,262 POSTS
[quote:187c874b9d="mickeytl"]Ok, I'm going to have my uncle take the fuel pump out and replace the 2 inch hose and see what the outcome will be...Thanks.[/quote:187c874b9d]

You cant use just regular hose.
you shouldn't even use standard fuel injection hose.
You need hose that meets SAE 30R10 rating and is capable of being fully immersed in gas.

you can buy a 12" piece of it from Napa for about 15 bucks.
if the size you need is 8mm (5/16") then the part number is H-209
Jul 23, 2009 at 12:57 PM
Avatar
MICKEYTL
  • MEMBER
  • 15 POSTS
The fuel pump has be removed out of the car. The 2 inch hose and the strainer has been replaced with new ones. The fuel pump has been installed back into the car. I will test the car and should know the outcome in a few days. Will let you know...later.
Jul 27, 2009 at 10:48 AM
Avatar
BUDDYCRAIGG
  • CERTIFIED EXPERT
  • 2,262 POSTS
what kind of shape was the hose in?
Jul 27, 2009 at 10:59 AM
Avatar
MICKEYTL
  • MEMBER
  • 15 POSTS
The hose was in pretty good shape, but I still went ahead and replaced it. So we'll see what happens in a few days.
Jul 27, 2009 at 10:27 PM
Avatar
MICKEYTL
  • MEMBER
  • 15 POSTS
The hose and strainer was replaced when I had a half tank of gas a few days ago. My Legend did reach a quarter tank yesterday and it didn't stall or died on me when it usually does. I was able to drive about 30-35 miles after my fuel light came on. I'm gonna give it another test by filling up a full tank today and see if I still get the same outcome. I should know in about a week or so. .So far I'm pretty satisfied with the outcome...later.
Jul 30, 2009 at 10:33 AM
Avatar
KASEKENNY
  • CERTIFIED EXPERT
  • 18,907 POSTS
Just to jump in on this, the engine is an interference engine so the belt needs to be changed but they have you inspect it and when it starts to wear is when you replace it.

Here is a guide that will help with this topic:

https://www.2carpros.com/articles/how-a-timing-belt-works

I am attaching the info below from the manual that will help with doing this.

Please run through this info and let us know if you have other questions. Thanks
Jul 24, 2021 at 7:43 AM