Stereo installation

Thanks for visiting 2CarPros.

If you are installing an aftermarket radio the wiring is as follows.

Light green and violet to yellow.

Yellow and black to red.

Black to black.

The speakers are orange and red to purple with black stripe.

Brown and pink to purple.


White and light green to grey.

Dark green and orange to grey with black stripe.


Grey and light blue to green with black stripe.

Tan and yellow to green.

Orange and light green to white.

Light blue and white to white with black stripe.


I'll post the wiring diagram information below.

Hello,

Here is the complete radio wiring so you can see what goes to where. Check out the diagrams (below). Please let us know if you need anything else to get the problem fixed.

I think I got it. the red/black just gets capped off and the two green/black get tied together and the single black goes to the new stereo?

Sound right. let me know what happens.

Got dead short somewhere. blowing fuses.

Do you have the wiring from the new stereo? We need to see it.

Standard Pioneer hookup.

it's the same as in the diagram you sent me in that second email yesterday.

Hmm, i don't see it. can you upload it here to the post?

Okay, here is what I got. Help!

Can you please disconnect all wires except the yellow, red and black to see if the fuse still blows?

Did that. No blown fuses. stereo still not lighting up.

It should at this point you might have got a bad one. Also none of the remaining wires should go to ground.