97 olds cutlass supreme sl flywheel changout

1997 OLDSMOBILE CUTLASS
210,000 MILES • 3.1L • 6 CYL • 2WD • AUTOMATIC
Avatar
KEITHMORENZ
  • MEMBER
  • 13 POSTS
I just changed my flywheel. Got everything lined up and back in the position tightened down. Started engine. It ran fine for about 2 to 3 minutes. Then it just stops. Now I can't turn it over can't get the crank to move by hand something is locked up. Any suggestions
Feb 23, 2014 at 11:45 AM
Advertisement
Avatar
DOCHAGERTY
  • CERTIFIED EXPERT
  • 9,603 POSTS
Did you disturb the torque converter? The flex plate alone shouldn't cause issues. Is there something wrong with the engine? Is there oil in the engine?
Feb 23, 2014 at 8:12 PM
Avatar
KEITHMORENZ
  • MEMBER
  • 13 POSTS
Everything ran great before flex plate broke off. Oil is good. I took torque converter off old flex plate and mounted to new. It ran fine for about 3 minutes then stopped. No noises or anything bad happened. Just stopped. Now won't crank. Can't even move with a ratchet on front of crank. Could the linkage on transmission have moved and cause engine to not move?
Feb 24, 2014 at 5:36 AM
Advertisement