4.0 to 5.0 engine swap?

2006 FORD MUSTANG
31,000 MILES • 4.0L • V6 • 2WD • MANUAL
Avatar
20064.0PCB
  • MEMBER
  • 1 POST
Good day,

I have the car listed above, I am removing the 4.0 engine in it and swapping it out with a 2013 5.0. I’m guessing this is common… I have purchased the new condenser, dryer and refrigerant lines to convert to the 2013 compressor. I would greatly appreciate any advice to help with my journey, obstacles, how to videos, etc…

Thank you in advance for your time and help with this fun packed task!

Gene
Dec 2, 2023 at 1:55 AM
Advertisement
Avatar
STRAILER
  • CERTIFIED EXPERT
  • 53,854 POSTS
Yep, this will be a fun project. Do you have the complete engine wiring harness with PCM as well or are you going for an aftermarket stand alone PCM? Also make sure the transmission will bolt up and that the crankshaft has a pilot bearing in it.

Engine Mounts: The 5.0 engine may require different mounts to fit correctly in the 2006 model's engine bay. Check if you need custom mounts or if there are ready-made solutions.

Transmission: Ensure the transmission is compatible with the 5.0 engine. You may need to upgrade or modify your transmission.

Wiring and ECU: A 2013 5.0 engine will have different wiring and control requirements. You'll likely need the ECU from a 2013 Mustang and potentially a custom wiring harness.

Exhaust System: The exhaust manifold or headers and the rest of the exhaust system may require modification.

Here are a series of video of the job being done to help as well:

https://www.youtube.com/results?search_query=Mustang+4.0+to+5.0+swap

If you have any questions while doing the job, please post images or short videos so we can help you along the way. Good luck on the adventure!
Dec 2, 2023 at 11:25 AM