Third brake light not working

Welcome to CarPros.

Here are the directions for bulb replacement. You will need to refer the the attached picture for the steps.

HIGH-MOUNT BRAKE LIGHT REMOVAL/INSTALLATION

1. Disconnect the negative battery Cable.
2. Remove the rear spoiler.

See Picture 1

3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.

Let me know if this helps.
Joe

There is no spoiler on this car.

Welcome back:

Sorry about that. Here are the directions without a spoiler for the one in the vehicle. See picture 1 for the steps. Also, the cover over the light is clipped into place. You will need to pry it off. Follow the arrows shown in the picture for removal.

HIGH-MOUNT BRAKE LIGHT REMOVAL/INSTALLATION

In-Vehicle-Type
1. Disconnect the negative battery cable.

Picture 1


2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.

Let me know if this is what you needed.

Joe

Hi,

In such a lamp, how to replace the bulb?

Zsoldos Gyorgy

I attached a picture of the bulb type that should be in the vehicle. It simply pulls out and pushes in.